Leave Your Message
300m-steel-bars

300M Ultra-High Strength Steel
(UNS K44220 / AMS 6417 / 40CrNi2Si2MoVA)

The "Ace Material" of modern aerospace. An improved 4340 modification with 1.6% Silicon, providing exceptional high strength (up to 1930 MPa) and tempering resistance. The ultimate choice for critical landing gear components and high-stress structural parts.

  • ✔ AMS 6417 / ASTM A646 Compliant
  • ✔ Ultra-High Strength: UTS ≥ 1860–1930 MPa
  • ✔ VIM+VAR Double Vacuum Melted (Ultra-low H₂ content)
  • ✔ Excellent Fatigue & Fracture Toughness
Request a quote

1. Background: Evolution for Flight

300M is a modified version of the classic 4340 steel. To overcome the insufficient fatigue resistance and fracture toughness of 4340 for heavy-load aircraft landing gear, 300M was developed in the 1950s by adding over 1% Silicon (Si) and increasing Molybdenum (Mo) and Vanadium (V). This small compositional tweak led to a massive performance leap.

2. Chemical Composition

Element C Si Mn Cr Ni Mo V
Range (%) 0.38–0.43 1.45–1.80 0.60–0.90 0.70–0.95 1.65–2.00 0.30–0.50 0.05–0.10

Core Characteristics: The high Silicon (Si) content inhibits the formation of brittle phases and improves tempering stability, allowing 300M to maintain high strength after high-temperature tempering. This provides 6-8 times the strength of ordinary construction steel.

3. Heat Treatment: The Key to Unlocking Performance

The full potential of 300M requires a complex and precise thermal cycle:

  1. Austenitizing: Heating to approx. 870°C to dissolve carbides.
  2. Quenching: Rapid cooling in oil to achieve a martensitic structure.
  3. Cryogenic Treatment: Cooling to approx. -73°C to -84°C (-100°F to -120°F) to transform retained austenite into martensite, increasing hardness and stabilizing dimensions.
  4. Double Tempering: Performed at approximately 300°C (570°F) to eliminate internal stress, adjust toughness, and maintain the tempering resistance brought by silicon.

4. Typical Applications

  • Aerospace: Main and nose landing gear of modern high-performance aircraft (Boeing, Airbus, Lockheed Martin), landing gear struts, and actuators.
  • High-End Equipment: Rocket engine casings, helicopter rotor systems, F1 racing car drive shafts and suspension links.
  • Tooling: Heavy tools requiring extreme strength and wear resistance.

5. Advantages & Challenges

✅ Advantages

Perfect combination of strength, toughness, and fatigue performance. Mature technology with long-term proven reliability.

⚠️ Challenges

Highly Sensitive to Hydrogen Embrittlement: Hydrogen absorbed during electroplating or pickling can cause catastrophic fracture. Rigorous dehydrogenation baking is mandatory. Difficult to machine due to high strength.

Summary:
Despite competition from emerging materials, 300M steel, with its unparalleled reliability under extreme conditions, remains the unshakable king of high-performance landing gear materials.

Leave Your Message